Feature Comparison
| PROTOCOLS AND FEATURES SUPPORTED | Atheros Controller (Wired/WiFi Capable) EPCR5-7/Pro/DIN4/DC3 V222/ISO32 |
Taifatech
Controller (Wired Only) LPC1-7/DIN1-3/EPCR2-3 DC/POE/Gig PoE/V220 |
|
| HTTP (web) UI | X |
X |
|
| HTTPS (web) UI | X |
||
| HTTPS Certificate support | X |
||
| Outlet state reflected without page refresh. (FW 1.8+) | X |
||
| REST-Like API (over HTTP) | X |
||
| SNMP v1-3 (Simple Network Management Protocol) | X |
||
| UPnP (Universal Plug and Play) | X |
||
| SSH (Secure Shell) | X |
||
| UOM command-line/programming interface (FW 1.8+) | X |
||
| NTP (Network Time Protocol) | X |
X1 |
|
| DHCP (Dynamic Host Configuration Protocol) | X |
||
| Amazon Echo (Alexa) compatibility | X |
X2 |
|
| Temperature / Humidity sensor support | X3 |
||
| IFTTT compatibility including Google Home/Google Assistant | X |
X |
|
| MQTT API (Client) | X |
||
| ModBus/TCP slave | X |
||
| CoAP over WebSocket REST-like API | X |
||
| Fine-grained access with access tokens (FW 1.10.x+) | X |
||
| Change the state of several outlets as simultaneously as possible. (FW 1.10.11+) REST API or UOM |
X |
||
| Wireless Capable (Can be disabled) | X |
||
| Timezone support for Daylight Saving Time | X |
||
| Scripting* | |||
| Outlet on sequence delay setting | X |
X |
|
| Outlet cycle delay setting | X |
X4 |
|
| Autoping | |||
| Backup and Restore settings | X |
||
| Syslog (Both internal and to a syslog server) | X |
X |
|
| Event Notification (Email, XMPP (Jabber), Webhook, SNMP1-3) | X |
||
| Custom links below the menu | X |
X |
|
| Expandable custom links (more than 4) | X |
||
| Support for VPNs
(VPN support depends upon firmware version) (OpenVPN, TailScale, Zerotier, NetBird, innernet) |
X |
||
| Now possible to set
AC PDU's on-sequence-delay to zero (FW 1.14+) Requires special maintenance file |
|||
| OPC UA Support |
X |
||
| * New Atheros based units use
a subset of the powerful Lua
language for scripting. 1 Scripting must be used for NTP time sync 2 IFTTT must be used for both Alexa and Google Home compatibility 3 Temperature/Humidity sensors supported on the EPCR6, EPCR7, Pro and DIN4 only. 4 "On sequence delay" setting is used for the cycle delay. |
|||
| NEW Wired/WiFi Capable Power Controllers | |||
Ethernet Power Controller 5/6/7
 |
Web Power Switch
Pro |
Din Relay IV |
DC3 Smart Switch |
222 (90vac-240vac)
 |
DC32
 |
ISO 32
(Updated DC32) |
|
| Wired Ethernet Power Controllers | |||
|
EPCR3 Power Controller 
|
Web Power Switch 7 / 6 / 5/ 4 / 3 /LPC  |
DIN III / DIN II / DIN
|
EPCR2 / EPCR2L Power Controller |
DC Smart Switch
|
V220 Smart Switch |
24V
Regulated PoE Injectors |
Vertical PDU |
